In order to save space, domestic indoor parking lot is generally located in the basement, the light is dim, more dust when driving, uphill and downhill also easy to problems, with people's increasingly high environmental comfort requirements, epoxy floor paint has become the most popular commercial residential shopping center parking lot paint, it has The following advantages:
1. Epoxy floor paint is a seamless floor, which can completely seal the cement surface, prevent the production of dust, improve the cleanliness of the plastic environment and easy to clean.
2. According to the anti-skid requirements of different parking areas and cities, epoxy coating surface can also be constructed with different effects. Slopes can be used as anti-skid floors, which can effectively reduce the safety accidents caused by vehicle landslides and improve the safety of driving.
3. Entrance ramp, main lane, parking space and lane parking line can be matched with different colors of epoxy floor paint to improve visibility and discrimination, to prevent some parking accidents when the lights are dim.
4. Slopes, lanes, parking spaces and lane lines can be customized according透水地坪 to customer needs, creating a unique parking system for customers, highlighting the personality of the customer brand.
5. Epoxy floor paint is extremely wear-resistant and pressure-resistant. It can be used frequently in cars and trucks with a service life of more than 10 years.
At the same time, underground garage traffic is relatively large, easy to cause underground garage noise pollution, and in the course of driving underground garage needs anti-skid function, then underground garage floor paint how to achieve anti-skid effect?
Underground garage is a parking place, in order to prevent vehicle skidding accidents, so anti-skid is the primary protection of underground garage floor paint, underground garage floor paint how to achieve anti-skid effect?
Antiskid ground floor
Conventional epoxy floors have outstanding wear resistance, compression resistance, impermeability, acid and alkali resistance, simple protection and other functions. Epoxy floor paints in different places have special needs, such as electronics and electrical production workshop needs to do anti-static floor. In addition to the parking lot needs a long time to accept the pressure of traffic vehicles, but also the need for certain friction, convenient braking.
Underground garage needs long time to travel, and often needs brakes. And the brake demand for certain ground friction, that is, the need for epoxy floor has a certain anti-skid function, especially in the underground parking entrance ramp, to ensure traffic safety.
Underground garage floor paint can choose epoxy mortar, concrete sealant and other high wear-resistant type of floor, and underground parking lot ramp can choose orange anti-skid floor. The construction technology is as follows:
1. base surface processing环氧地坪
The original ground debris (e.g. cement blocks, paint, etc.) must be treated completely; the smoother foundation ground should be polished to increase the bond strength between the original ground and Epoxy. Use 2m to check with the ruler. The high area is grinded with the polishing machine, and the dust is absorbed by the small industrial vacuum cleaner. Surface water content should be less than 6%, non-conforming parts should be treated by gas gun drying until dry.
2. roller brush epoxy base oil
The epoxy and curing agent are proportionally prepared, and the prepared epoxy primer is evenly coated with a flat knife or roller on a clean, dry and rough ground until it solidifies naturally. The curing time is 8 hours (depending on the weather). Inspection of primer coating should be re coated if the ground is completely absorbed.
3. construction of anti slip mortar layer
After mixing and stirring the solvent-free intermediate coating materials in proportion, 40 mesh quartz sand is put into the intermediate coating materials in a certain proportion, and the slurry is blended to a slightly dry state. The surface is scraped with a toothed trowel knife or a flat knife of steel plate. Sanding method can be used to fill the rough areas.
4. after curing, remove floating sand.
Use small hand grinder to quickly and lightly grind or remove broom with excess floats.
Use epoxy topcoat to roll one or two channels to make the floor clean, uniform and beautiful.
Adequate maintenance time to improve the early strength of the floor is very helpful, and indirectly affect the life of the future floor, maintenance period should not be used by yourself.